Wlan Security Default-Key (Client) - Siemens SCALANCE W760 Configuration Manual
Industrial wireless lan
Hide thumbs
Also See for SCALANCE W760:
- Configuration manual (464 pages) ,
- Operating instructions manual (50 pages) ,
- Operating instructions manual (51 pages)
Table of Contents
Advertisement
Result
The encryption method is configured.
Further notes
You display the settings with the
10.2.5.3
wlan security default-key (client)
Description
With this command, you specify which WEP key from the key table is used for encryption.
Note
This command is only available in the client mode.
Requirement
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
Syntax
Call up the command with the following parameters:
wlan security default-key <index(1-4)>
The parameter has the following meaning:
Parameters
index
Result
The WEP key is specified.
Further notes
You display the settings with the
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
show wlan security
Description
Index of the key table
show wlan security <wlan 0/X>
Security and authentication
command.
Values or range of values
1...4
Default: 1
command.
10.2 WLAN
377
Advertisement
Table of Contents
