Security and authentication
10.2 WLAN
Syntax
Call up the command with the following parameters:
wlan security ap-radius-authenticator port-number <index (1-2)> <1-65535>
The parameters have the following meaning:
Parameters
index
1-65535
Result
The input port is configured.
Further notes
You display the setting with the
See also
show wlan security ap-radius-authenticator (Access Point) (Page 361)
10.2.4.6
wlan security ap-radius-authenticator primary
Description
With this command, you configure the RADIUS server as primary server.
Note
This command is available only in access point mode.
Requirement
You are in the WLAN Configuration mode and the "wlan security ap-radius-authenticator
address" is configured.
The command prompt is as follows:
cli (config-wlan)#
368
Description
Index of the RADIUS server
Number of port
show wlan security ap-radius-authenticator
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Values or range of values
1...2
1...6553
Configuration Manual, 11/2014, C79000-G8976-C351-03
command.