Siemens SCALANCE W760 Configuration Manual page 218

Network structures
6.2 VLAN
Syntax
Call up the command with the following parameters:
no ports
(
)
[
]
[
]
[name<vlan-name>]
The parameters have the following meaning:
Parameter
interface-type
/a-b,0/c,...
untagged
all
forbidden
name
vlan-name
For information on identifiers of addresses and interfaces, refer to the section "Interface
identifiers and addresses (Page 23)".
Result
The ports are reset.
Further notes
You display details of the function with the
You reset the setting with the
218
[<interface-type><0/a-b,0/c,...>]
[<interface-type><0/a-b,0/c,...>]
untagged<interface-type> <0/a-b,0/c,...>
(
[<interface-type><0/a-b,0/c,...>]
)
(
forbidden<interface-type><0/a-b,0/c,...>
[<interface-type><0/a-b,0/c,...>]
)
Description
Type or speed of the interface
Port no. of the interface
Keyword for interfaces or ports that transfer
data packets without VLAN marking
Specifies that all interfaces or ports are set
to "untagged"
Keyword for forbidden interfaces or ports
Keyword for the name assignment
Name of the VLAN
[all]
[all]
[all]
show vlan
command.
no ports
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
Values
Enter a valid interface.
-
-
-
-
max. 32 characters
command.