Siemens SCALANCE W760 Configuration Manual page 323

Parameter
security-model
Authentication
message-processing
Storage type
Keywords need to be specified.
If optional parameters are not specified when configuring, the default values apply.
Result
The SNMP target parameters are configured.
Further notes
You delete the SNMP target parameters with the
You display settings of this function with the
You configure the user profile with the
You configure a filter with the
You display the list of users with the
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
Description
Specifies whether the security settings
are used according to SNMP version 1,
2c or 3
Keyword
Authentication and encryption setting
for v3
Specifies whether the processing of the
messages is according to SNMP ver-
sion 1, 2c or 3
Keyword
specifies whether the settings remain
following a restart:
show snmp targetparam
snmp user
snmp filterprofile
show snmp user
Range of values / note
•
v1
•
v2c
•
v3
•
auth
•
noauth
•
priv
•
v1
•
v2c
•
v3
•
volatile
The settings are lost after a
restart
•
nonvolatile
The settings are retained after
a restart
command.
no snmp targetparams
command.
command.
command.
command.
Network protocols
7.4 SNMP
(volatile):
(non-volatile):
323