Wlan Security Dot1X Username (Client) - Siemens SCALANCE W760 Configuration Manual
Industrial wireless lan
Hide thumbs
Also See for SCALANCE W760:
- Configuration manual (464 pages) ,
- Operating instructions manual (50 pages) ,
- Operating instructions manual (51 pages)
Table of Contents
Advertisement
Further notes
You display the settings with the
10.2.5.7
wlan security dot1x username (client)
Description
With this command, you specify the user name for the RADIUS server.
Note
This command is only available in the client mode.
Requirement
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
Syntax
Call up the command with the following parameters:
wlan security dot1x username <string>
The parameter has the following meaning:
Parameters
string
Result
The user name is specified.
Further notes
You display the settings with the
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
show wlan security <wlan 0/X>
Description
Values or value table
User name
Enter the user name for the RADIUS server. You speci-
fy the corresponding password with the
dot1x password
show wlan security <wlan 0/X>
Security and authentication
command.
wlan security
command.
command.
10.2 WLAN
381
Advertisement
Table of Contents
