Wlan Security Dot1X Check-Server-Certificate (Client) - Siemens SCALANCE W760 Configuration Manual

Industrial wireless lan

Hide thumbs Also See for SCALANCE W760:

Table of Contents

Security and authentication

wlan security dot1x check-server-certificate (client)

With this command, you enable the validation of the server certificate on the client.

This command is only available in the client mode.

You are in the Interface Configuration mode of the WLAN interface.

The command prompt is as follows:

cli (config-if-wlan-0-X)#

Call the command without parameter assignment:

wlan security dot1x check-server-certificate

Validation is enabled.

Further notes

You display the settings with the

You disable the validity check with the

command (default setting).

Scalance w720