Dhcp Server; Show Ip Dhcp-Server Pools - Siemens SCALANCE W760 Configuration Manual

The parameters have the following meaning:
Parameter
mac
client-id
client-id
sysname
Result
The registration mode of the DHCP client is configured.
7.3

DHCP server

This section describes commands relevant for configuring the DHCP server.
Requirement
The connected devices are configured so that they obtain the IPv4 address from a DHCP
server.
7.3.1

show ip dhcp-server pools

Note
The command is only available with the following device:
• SCALANCE W722-1 RJ-45 (MLFB 6GK5722-1FC00-0AA0 and 6GK5722-1FC00-0AB0
(US version))
Description
The command shows the DHCP server configuration of a specific IPv4 address band or all
IPv4 address bands and the corresponding DHCP options.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
Description
The client registers with its MAC address
The client registers with the assigned ID
Name of the assigned ID
The client registers with the assigned system
name
or
cli#
Network protocols
7.3 DHCP server
Range of values
-
-
max. 32 characters
-
281