Creating A Typical Backup Configuration - Fujitsu ETERNUS CS800 Getting Started Manual

Initial Configuration
b) Select Administrator, type spcc for the password, and click Login.
Figure 71: Home Screen
V
I

Creating a Typical Backup Configuration

Before you can begin using the ETERNUS CS800 for backups, you must configure the
system for NAS or Symantec™ NetBackup OST. See the following sections for detailed
instructions for completing each type of configuration:
"NAS configuration" on page 96
●
See this section to configure the ETERNUS CS800 to use OST (OpenStorage) and
Symantec Veritas NetBackup to perform backups and Optimized Duplication.
OST configuration
●
For OST configuration see ETERNUS CS800 User Guide.
U41842-J-Z125-1-76
The Home page displays,
CAUTION!
Please change the default password immediately (Configuration > Security).
Information on the field Status (Attention is highlighted yellow):
The DX80 is preconfigured in the factory and a Background Initialize is started. This
Background Initialize continues to run on the customer side. Depending on the
configuration (number of storage modules), it can run for between one and several
days. This is NOT AN ERROR.
Further information is provided in section
Creating a Typical Backup Configuration
"Background Initialize" on page 99.
95