Deliverable Variants; Environmental Conditions - Fujitsu ETERNUS CS800 Getting Started Manual

Deliverable Variants

When you order an ETERNUS CS800 system you choose whether you get it installed in a
rack or whether you get the single components.
If you order an ETERNUS CS800 system within a rack,
follow the instructions in
●
then perform the
●
If you order an ETERNUS CS800 system as single components,
prepare the Installtion as described in
●
Components" on page
perform the steps for
●
then perform the
●
In both cases you are asked to follow the
Fujitsu recommends installing the ETERNUS CS800 system in a controlled or restricted
area to prevent access by untrained personnel. In addition, Fujitsu recommends that
system installation be performed only by qualified IT personnel.

Environmental Conditions

The installation site must have the following environmental conditions:
Humidity: 20% to 80% (non-condensing)
●
Temperature: 50° to 95°F (10° to 35°C)
●
These environmental conditions apply when the ETERNUS CS800 system is in operation.
U41842-J-Z125-1-76
"Installing an ETERNUS CS800 Rack" on page
"Initial Configuration" on page
37,
"Installing the ETERNUS CS800 Components" on page
"Initial Configuration" on page
81.
"Preparing the Installation of ETERNUS CS800
81.
"Environmental Conditions"
25,
41,
below.
23