Fujitsu ETERNUS CS800 Getting Started Manual page 82

Accessing and Completing the Setup Wizard
2. Wait 15 minutes for the system to boot before continuing with the procedure.
RX300 S5 server:
DX80 module:
Power button
Figure 56: Power Buttons
3. Using an Ethernet cable, connect the Ethernet port on the service laptop to an Ethernet
port on the back of the RX300 S5 server (see
Figure 57: Ethernet port on the rear of the CS800 server
82
Power button
figure 57).
Ehernet port
CS800 NAS Basic
The Ethernet port on
CS800 NAS Performance
is located in the same place.
Initial Configuration
U41842-J-Z125-1-76