Fujitsu ETERNUS CS800 Getting Started Manual page 91

Initial Configuration
17. Click OK to continue.
The Date/Time Settings page displays (see
Figure 66: Date/Time Settings
18. You can set date and time manually or by using an NTP server:
a) Select Manual to manually set the system date and time.
b) Select Use NTP to use a NTP server.
19. Select the Timezone.
20. Select the desired time format (24 hours or 12 hours).
21. Click Apply.
A message appears stating that completing the setup will restart the system.
U41842-J-Z125-1-76
Click Edit to specify the system date. Use the drop down boxes to specify the
system time.
I
You can also choose to synchronize the system time with an NTP time
server. For more information, refer to the ETERNUS CS800 User Guide.
Select a Timeserver Pool or specify the server or pool by its IP address.
Accessing and Completing the Setup Wizard
figure 66).
91