Notes On Upgrade - Fujitsu ETERNUS SF Express V16.6 Migration Manual

It is not possible to use the Upgrade Installation provided in this manual.
Uninstall the previous version product and install this version product. Afterwards, perform as new all necessary setup and
customization operations for this version.

1.4 Notes on Upgrade

Operating Systems
The operating system version on the server where the upgrade is performed must be supported by the version of the product that is
installed.
See
Refer to "Operating Environment" in the ETERNUS SF Installation and Setup Guide for information on the operating system versions
supported by the product.
Migration to IPv6 Environment
After performing the Upgrade Installation of this product, change the settings for IP address environments in this product, operating
system and associated software.
See
-
Refer to "Changing IP Address of Management Server" and "Changing IP Address of Server Node" in the ETERNUS SF Storage Cruiser
Operation Guide for information on changing the IP address environment in Storage Cruiser.
-
Refer to "Changing IP Address of Management Server" and "Changing IP Address of Managed Server" in the ETERNUS SF
AdvancedCopy Manager Operation Guide for the corresponding operating system of the server to be changed for information on
changing the IP address environment in AdvancedCopy Manager.
Concerning Configuration of Version 15.x Session Timeout
When a time longer than the screen refresh interval is configured for the session timeout value, in Version 15.x, the session timeout
function was disabled. In Version 16 or later, the session timeout function has been enabled. When the session timeout value is
exceeded without Web Console being operated, a session timeout occurs.
Upgrade Installation passes the values configured for the session timeout value and the screen update interval to this version. For this
reason, even if session timeout was disabled before performing the update, it is enabled after performing the update.
In order to disable session timeout, login to Web Console after upgrading to this version, and configure the session timeout value to
be 0 (minutes).
Information
Refer to "Change Value for Session Timeout" in the ETERNUS SF Web Console Guide for information on how to change the session timeout
value.
Concerning Mounting of DVD-ROM Media (For Linux Only)
When mounting the DVD-ROM media of this product manually, specify the iso9660 file system explicitly when executing the mount
command.
In command example, the device name of the DVD-ROM drive is mounted as /dev/cdrom. The device name of the DVDROM drive may
differ depending on the device.
# mount -t iso9660 -r /dev/cdrom dvdromMountPoint
- 4 -