Connectiing The Cs800 With The Customer Network; Lan Cabling - Fujitsu ETERNUS CS800 Getting Started Manual

Connectiing the CS800 with the Customer Network

22. Click Yes to restart the system.
A message appears stating that you have to wait at least 15 minutes.
23. Disconnect the service laptop from the RX300 S5 server. Reset the computer network
settings back to its former values.
Connectiing the CS800 with the Customer Network

LAN Cabling

Connect the Ethernet cables to the RX300 S5 server as shown in
configuration and
I
Figure 67: Connecting the Ethernet Cables for NAS Basic Configuration
92
figure 68 for NAS Performance configuration.
The Ethernet cables are used for remote management and NAS connectivity.
1 Gbit/s
Possible Ethernet connections
Initial Configuration
figure 67
1 Gbit/s
The service port (X)
may not be used.
for NAS Basic
U41842-J-Z125-1-76