Fujitsu ETERNUS CS800 Getting Started Manual page 89

Initial Configuration
13. On the IP page:
Your network administrator will provide you with the IP address information.
V
a) Under System, enter the IP Address, the Netmask, and the Default Gateway you
b) If your site uses DNS, under DNS, enter the Primary, Secondary, and Tertiary
14. Click Next.
The Network Configuration - Confirm page displays (see
.
Figure 64: Network Configuration - Confirm
15. Check your settings and click Apply if they are correct.
A WARNING indicates that changing the network configuration requires a system
reboot after the final step, see
U41842-J-Z125-1-76
Make sure you enter the correct IP address information and that you write this
information down. If you enter the incorrect IP address information and reboot,
you will not be able to access the system.
want to use to join the ETERNUS CS800 to your network.
DNS IP Address.
Accessing and Completing the Setup Wizard
figure 65.
figure 64)
89