Preparing the Installation of ETERNUS CS800
Components
Before you begin the installation procedure in
nents" on page
Consider
●
"Necessary Tools" on page 38
●
"Taking ESD Precautions" on page 38
●
"Unpacking the ETERNUS CS800" on page 38
●
Rack Requirements
Table 1
Height
Width (side to side)
Depth (front to back)
Weight (stand alone)
Air Clearance
Ventilation Clearance
Table 2: Rack Requirements
U41842-J-Z125-1-76
41, make the following preparations as described in this section:
"Rack Requirements" on page 37
contains the rack requirements for the ETERNUS CS800 components.
ETERNUS CS800
without expansion modules
4 HU, 16.0 cm
48.4 cm
77.0 cm
95 kg
Open 4" (10.2 cm) before and behind unit for proper air flow
At least 200 mm on the front and rear
"Installing the ETERNUS CS800 Compo-
with expansion modules
up to 22 HU, 88.0 cm
48.4 cm
77.0 cm
up to 375 kg
37