Fujitsu ETERNUS CS800 Getting Started Manual page 97

Initial Configuration
a) In the Domain Type box, select Workgroup.
b) In the Domain/Workgroup Name box, type the name of the Windows workgroup
c) Click Apply.
3. To add a Workgroup User, select the Access Control tab and enter a Username and
Password. Do NOT grant admin rights and click Apply.
4. Create a de-duplicated NAS share:
a) From the NAS & OST page, click the NAS tab.
b) From the NAS Shares page, click the Add tab.
Figure 73: Add NAS Share Page
a) In the Name box, type a name for the NAS share.
b) Under Protocol, select Export using CIFS.
c) Ensure that the Enable Deduplication check box is selected (deduplication is
U41842-J-Z125-1-76
to join.
A confirmation message appears. Click Yes to confirm, then click OK to continue.
The NAS Shares page displays.
The Add NAS Share page displays (see
The share will appear as this name on the Windows network.
enabled by default).
Creating a Typical Backup Configuration
figure 73).
97