HP proliant ML110 Operation And Maintenance Manual page 99

a. Disconnect the power, data, and LED cables connected to the hot-plug cage
b. Press the hard disk carrier button to release the carrier latch.
c. Rotate the carrier latch outward.
d. Hold the carrier latch, and then pull out the carrier from the cage to release it.
e. Slide the carrier out from the cage.
5. Remove the HDD cage from the server
a. Remove the six Torx screws that secure the cage to the chassis.
b. Gently slide out the cage from the chassis.
HP ProLiant ML110 Server Operations and Maintenance Guide
backplane.
Figure 8-2: Removing the hot-plug HDD
Keep the screws for reinstalling the cage later.
Addendum - SATA Configuration
8-3