HP proliant ML110 Operation And Maintenance Manual page 36

c. Move the lever downward to release the bar from its retaining hook.
6. Prepare the new drive (tape drive, internal backup device, or DVD-ROM drive) for
installation.
Refer to the documentation that came with the drive for related installation procedures.
7. Install the new drive:
a. Guide the new drive into the selected common bay, with the cable connectors of the
b. Press the retaining lever downward.
c. Move the lever into its retaining hook to secure the new drive in place.
d. Connect the drive power cable to its connector on the rear of the drive.
HP ProLiant ML110 Server Operations and Maintenance Guide
Figure 4-9: Preparing the common bay for drive installation
drive facing the rear of the chassis, then push the drive all the way into the chassis
until the mounting holes are aligned.
System Configuration
4-11