System Setup
Powering On/Off the Server
To Apply Power to the Server
After making sure that you have set up the server properly and connected all the required
peripheral cables, you can now apply power to the server.
1. Verify that the monitor is properly connected to the server and is plugged into a properly
grounded, wall power outlet.
2. Connect the server's power cable.
Plug the power cable into the power cable socket located on the rear panel of the server.
Then plug the other end of the power cable into a properly grounded, wall power outlet.
3. Press the power button
3-6
Figure 3-6: Connecting the server's power cable
on the front panel and then turn on the monitor.
Figure 3-7: Turning on the server
HP ProLiant ML110 Server Operations and Maintenance Guide