4. Lubricate the gasket on the filter canister with clean oil.
5. Install the filter canister by hand until the gasket
contacts mounting surface, then rotate it an additional
1/2 turn.
6. Tighten the drain plug on the bottom of the filter
canister.
Electrical System
Maintenance
Fuses
The fuses for the machine's electrical system are located
under the center of the dash panel (Figure 46 & Figure 47).
1. Fuses
1. 4WD, Transmission 10A
2. Electric fuel injection,
electric start 25A
3. Hazard 10A
4. Lights, brake 15A
41
Figure 46
Figure 47
5. Horn, power point 15A
6. Fuel pump, supervisor
switch 10A
7. Switched power 10A
8. Power outlet 10A