Assembly Instructions - Spirit XE795 Owner's Manual

Hide thumbs Also See for XE795:

Table of Contents

Assembly Instructions

PRE-ASSEMBLY

Using a razor knife (Box Cutter), cut the banding straps that wrap around the carton. Reach under

the bottom edge of the carton and pull it away from the cardboard underneath, separating the

staples that join the two together. Lift the box over the unit and unpack.

Carefully remove all parts from carton and inspect for any damage or missing parts. If damaged

parts are found, or parts are missing, contact your dealer immediately.

Locate the hardware package. The hardware is separated into four steps. Remove the tools first.

Remove the hardware for each step as needed to avoid confusion. The numbers in the

instructions that are in parenthesis (#) are the item number from the assembly drawing for

reference.

Assembly Tools

#98. 12/14mm Wrench (1 pc)

#93. 13/14mm Wrench (1 pc)

#94. Phillips Head Screw driver (1 pc)

#97. 5mm L Allen Wrench (1 pc)

#95. 8mm L Allen Wrench (1 pc)

Table of Contents