Assembly Instructions - Spirit XE195 Owner's Manual

Assembly Instructions

PRE-ASSEMBLY
1. Using a razor knife (Box Cutter), cut the banding straps that wrap around the carton. Reach under the
bottom edge of the car ton and pull it away from the cardboard underneath, separating the staples that
join the two together. Lift the box over the unit and unpack.
2. Carefully remove all parts from car ton and inspect for any damage or missing parts. If damaged parts
are found, or parts are missing, contact your dealer immediately.
3. Locate the hardware package. The hardware is separated into four steps. Remove the tools first.
Remove the hardware for each step as needed to avoid confusion. The numbers in the instructions
that are in parenthesis (#) are the item number from the assembly drawing for reference.
Assembly Tools
#157. Phillips Head Screw Driver (1 pc)
#155. 13/14m/m Wrench (1 pc)
#177. Combination M5 Allen Wrench &
Phillips Head Screw Driver (1 pc)
#158. 12/14m/m Wrench (1 pc)
5