ASSEMBLY INSTRUCTIONS
UNPACKING
1. Cut the straps, then lift the box over the unit and unpack.
2. Locate the hardware package. The hardware is separated into four steps. Remove the tools first.
Remove the hardware for each step as needed to avoid confusion. The numbers in the instructions
that are in parenthesis (#) are the item number from the assembly drawing for reference.
ASSEMBLY TOOLS
#125. 17 mm
Wrench (1 pc)
#123. Combination M6 Allen Wrench &
Phillips Head Screw (1 pc)
Customer Service 1-888-707-1880
Email: customerservice@dyaco.ca
#122. 13/14 mm
Wrench (1 pc)
6
#126. Phillips Head
Screw driver (1 pc)
#124. M12_L Allen Wrench (1 pc)
Dyaco Canada Inc. 2020