Spirit XE795 Owner's Manual page 8

STEP 2
1. Gather HARDWARE FOR STEP 2.
2. Unwind the COMPUTER CABLE (27) from the frame bracket and run it through the CONSOLE
MAST COVER (38). Use the twist tie at the bottom of the CONSOLE MAST TUBE (2) and wrap
around the computer cable. Feed the computer cable up through the MAST (2) and pull through the
top of the mast.
3. Insert the bottom of the CONSOLE MAST (2) into the frame bracket. Be sure not to pinch the
computer cable between the mast and the frame during this step.
4. Slide the CONSOLE MAST COVER (38) up the CONSOLE MAST (2) and secure the mast to the
frame with 3 BOLTS (85) and 3 FLAT WASHERS (84) to each side of the mast. Secure with a
BOLT (85) and CURVED WASHER (86) to both the front and back of the mast. Tighten all bolts
with the 13/14 WRENCH.
5. Snap the CONSOLE MAST COVER (38) in place over the frame covers.
HARDWARE
#84. 5/16" × 18 × 1.5T
Flat Washer
(6 pcs)
#86. 5/16" × 23 × 1.5T
Curved Washer
(2 pcs)
7
#85. M8x15mm
Hex Head Bolt
(8 pcs)