Table of Contents
Advertisement
34
Thick Facing Installation (stone, brick, or other non-combustible over 1" (25mm) thick)
If using a Fireplace Xtrordinair (FPX) arched face, see "Thick Facing with a Fireplace Xtrordinair Arched
Faces" on page 35.
Do not install masonry (or other
material) in front of the
fireplace. This area must remain
open to install the face.
TOP VIEW - Protruding Masonry
Fireplace
TOP VIEW - Recessed Masonry
Fireplace
NOTE: The nailing brackets are not used for this type
of installation - secure the fireplace to the floor with
the brackets along the base of the fireplace.
© Travis Industries
Installation
(for qualified installers only)
Framing
Nailing Bracket
Drywall
Masonry
Framing
Drywall
(or cement board, etc.)
Masonry
4090507
Floor-Mounted Fireplaces or Raised Hearths:
Build the hearth 1" (25mm) maximum above the
base of the fireplace. The fireplace may be
raised to accommodate thicker hearth materials.
Raised Fireplaces:
Masonry is installed 1" (25mm)
maximum above the base of the
fireplace.
FRONT VIEW
41"
1041mm
35-3/4"
908mm
1"
100-01217_000
Advertisement
Table of Contents
