Table of Contents
Advertisement
56
Optional Equipment
4
Carefully place the floor
firebacks into position.
You must tip them under
and around the corners of
the burner. Once in
place, bend the accent
light deflectors back to
the correct position (take
care to not damage the
halogen bulbs).
5
Carefully replace the front
and rear grates (they rest
on top of the floor
firebacks).
6
Install the side firebacks
following the directions
below.
7
Restore the fireplace to
the correct configuration.
The ceramic firebacks are fragile. Ensure proper alignment of individual pieces in each step. To achieve
the ideal appearance, you may need to make slight adjustments.
© Travis Industries
(for qualified installers only)
4090507
Remove the clips on both sides (loosen the screws
a
a couple turns and slide clips up and out).
5/16" Nutdriver
Place the side firebacks into position.
b
Secure the clips to anchor
c
the side firebacks.
100-01217_000
Advertisement
Table of Contents
