Table of Contents
Advertisement
70
Optional Equipment
21
Clip any excess wiring into the wire clips on the back of the control panel (see Figure 33). Use
the included wire ties, if necessary, to keep all wiring from contacting any hot or moving
components. Re-attach the control panel (see Figure 34) and shroud (see Figure 1).
22
A wall mount is included with this kit for the remote. It may be mounted to the wall for easy
access and storage. Use the included drywall anchors (and screws) to secure it to the wall (see
Figure 35).
23
Restore power to the fireplace and test operation of the remote (see the instructions included with
the remote).
© Travis Industries
(for qualified installers only)
Figure 31
Figure 33
4090507
Figure 32
Figure 34
Figure 35
100-01217_000
Advertisement
Table of Contents
