Thick Facing Installation (Stone, Brick, Or Other Non-Combustible Over 1" (25Mm) Thick); Travis Industries - Travis Industries GreenSmart 2 Fireplace 564 SS GSR2 Installation Manual

Thick Facing Installation (stone, brick, or other non-combustible over 1" (25mm) thick)

If using a Fireplace Xtrordinair (FPX) arched face, see "Thick Facing with a Fireplace Xtrordinair Arched
Faces" on page 38.
Do not install masonry (or other
material) in front of the
fireplace. This area must remain
open to install the face.
TOP VIEW - Protruding Masonry
Fireplace
TOP VIEW - Recessed Masonry
Fireplace
NOTE: The nailing brackets are not used for this type
of installation - secure the fireplace to the floor with
the brackets along the base of the fireplace.
© Travis Industries
Installation
Framing
Nailing Bracket
Drywall
Masonry
Framing
Drywall
(or cement board, etc.)
Masonry
(for qualified installers only)
Floor-Mounted Fireplaces or Raised Hearths:
Build the hearth 1" max (25mm) above the base
of the fireplace. The fireplace may be raised to
accommodate thicker hearth materials.
Raised Fireplaces:
Masonry is installed 1" (25mm)
(maximum) above the base of the
fireplace.
FRONT VIEW
4140221
36-1/4"
921mm
37
29-1/4"
743mm
1"
25mm
100-01345