Thick Facing Installation (Stone, Brick, Or Other Non-Combustible Over 1" (25Mm) Thick) - Travis Industries 564 HO GS Installation Manual

Thick Facing Installation (stone, brick, or other non-combustible over 1" (25mm) thick)

If using a Fireplace Xtrordinair (FPX) arched face, see "Thick Facing with a Fireplace Xtrordinair Arched
Faces" on page 34.
Do not install masonry or other
material in front of the fireplace. This area
must remain open to install the face.
TOP VIEW - Protruding Masonry
Framing
Fireplace
Masonry
TOP VIEW - Recessed Masonry
Fireplace
NOTE: The nailing brackets are not used for this type
of installation -- secure the fireplace to the floor with
the brackets along the base of the fireplace.
© Travis Industries
Installation
Nailing Bracket
Drywall
Framing
Drywall
Masonry
(
for qualified installers only)
Floor-Mounted Fireplaces or Raised Hearths:
Build the hearth 1" maximum (25mm) above the
base of the fireplace. The fireplaces may be raised
to accommodate thicker hearth materials.
Raised Fireplaces:
Masonry is installed 1" (25mm)
(maximum) above the base
of the fireplace.
FRONT VIEW
4110505
36-1/4"
921mm
100-01263_000
33
29-1/4"
743mm
1"
25mm