22
Diffuser Plate Adjustment
Certain vent configurations require the diffuser plate to be adjusted (refer to the approved vent configuration
charts for details). See the directions below to change the diffuser to position.
© Travis Industries
Installation
(for qualified installers only)
DIFFUSER SIDE VIEW
Before (Stock - Position # 2)
After (Position # 1)
4090507
Remove the exhaust
restrictor.
1/4" Nutdriver
1/4" Nutdriver
Remove the diffuser.
Bend the round portion of the
diffuser 90° (position # 1).
Secure the diffuser plate
with the screws
removed earlier.
Replace the exhaust
restrictor (see "Exhaust
Restrictor Adjustment"
for restrictor settings).
100-01217_000