Table of Contents
Advertisement
52
Finalizing the Installation
LP Conversion Instructions
Install the conversion kit prior to installing the gas line to ensure proper gas use.
Remove the glass (see page 38). Remove the logs and embers (if installed - page 42).
1
Remove the grate , firebacks, and center burner (see illustration below).
2
Four screws hold the center
burner in place. Slide the
burner to the right and up to
remove.
© Travis Industries
1/4" Nutdriver
Remove the grate from both sides.
NOTE: lift the burner to remove the grate.
Remove the log shelf
(for qualified installers only)
4090507
100-01217_000
Advertisement
Table of Contents
