Table of Contents
Advertisement
Optional Equipment
Installation
Make sure power to the fireplace has been shut off prior to installation.
WARNING:
Refer to the wiring diagram on page 62 while making wiring harness connections.
NOTE:
1
Remove the concealment cover from the front of the fireplace (see Figure 1).
2
Unscrew the four screws holding the control cover in place (see Figure 2). Carefully remove the
control cover (see Figure 3)
3
Unplug the ac adapter from the power harness (see Figure 4). You can leave the ac adapter
plugged into the wiring harness.
© Travis Industries
(for qualified installers only)
Figure 2
4090507
Figure 1
Figure 3
Figure 4
100-01217_000
63
Advertisement
Table of Contents
