Toshiba E-STUDIO287CS User Manual page 312

SETTING ITEMS (ADMIN)
Selecting WEP security mode
The WEP is a data encryption method using the WEP key
1
between the Access Point and other wireless devices.
1 Press [WEP] and press [NEXT].
2
The WIRELESS ENCRYPTION - WEP screen is
displayed.
3
Enter the following items and press [NEXT].
2
4
• WEP ENCRYPTION
Select the bit length of the WEP key.
• KEY FORMAT
5
Select the character code for the WEP key.
• WEP KEY
Press this to enter the WEP key.
The maximum length of WEP key varies depending on
the WEP Encryption and Key Entry Method.
64 bit
HEX: 10
6
ASCII: 5
Memo
• When pressing WEP KEY button, the letter entry
screen is displayed. Enter the value using the
keyboard and digital keys, and press [OK] to set the
entry.
7
128 bit 152 bit
26 32
13 16
Select the transmit power and press
3
[NEXT].
Select the low transmit power if you want to limit the area
that the wireless communication is enabled. If you do not
have to limit the area, select [100%].
Confirm the settings and press [FINISH].
4
Memo
• If you want to change the settings, press [PREV] to
move back to the screen that you want to change and
then repeat the operation.
Press [YES], and wait until the setting is
5
reflected.
Selecting no security mode
You can also set no security for wireless access.
Note
• If you do not set no security, anyone knows how the SSID
can connect to the wireless network. Therefore, it is
recommended to set the security if it is possible.
- 312 -