Toshiba E-STUDIO287CS User Manual page 63

9) Resolution
This sets the resolution for printing.
- 600 dpi — Select this to print in 600 x 600 dpi.
- 600 x 1200 dpi — Select this to print in 600 x 1200 dpi.
Note
• When [600 x 1200 dpi] is selected, the functions below
are not available.
- Booklet printing
- Automatic change of paper source
10) Red Seal Color Mode
Select this check box to enhance color reproducibility of red
seal (orient signature) printing.
11) Color Balance
Adjusts the density of each color for printing. You can set
from -4 to 4.
Note
• This option is selectable only when [Auto], [Color], or
[Black and Red / Green / Blue / Cyan / Magenta / Yellow
/ White] is selected in the [Color Type] box in the Color
Settings 1 menu.
12) Image Attribute
This sets the sharpness, brightness, contrast, saturation
and background adjustment for printing.
- Sharpness
Adjusts the sharpness for printing. You can set from -4
(softest) to 4 (sharpest) by moving the scroll bar when
the [Use Sharpness Filter] check box is selected.
- Brightness
Adjusts the brightness for printing. You can set from -4
(darkest) to 4 (lightest) by moving the scroll bar.
- Contrast
Adjusts the contrast for printing. You can set from -4
(lowest) to 4 (highest) by moving the scroll bar.
- Saturation
Adjusts the saturation for printing. You can set from -4
(low clear) to 4 (high clear) by moving the scroll bar.
- Background Adjustment
Adjusts the density level of the background. You can set
from -4 (lightest) to 4 (darkest) by moving the scroll bar.
Advanced Color Settings
The Advanced Color Settings menu is displayed when
[Advanced Color Settings] is selected for the [Image Type]
option in the Color Settings 1 menu.
Memo
• Advanced Color Settings can be set from the TopAccess
menu. For detailed instructions on how to set Advanced
Color Settings from the TopAccess menu, refer to the
TopAccess Guide.
1
2
3
4
5
6
7
1) RGB Source profiles
This selects RGB source profile. When you obtained color
profile data from this equipment, its RGB source profile
data appear.
2) CMYK Source profiles
This selects CMYK source profile. When you obtained color
profile data from this equipment, its CMYK source profile
data appear.
3) Apply to Device Color only
Select this check box when you give priority to color profiles
embedded in the image.
4) Destination profiles
This selects destination profile. When you obtained color
profile data from this equipment, its destination profile data
appear.
5) Rendering Intent
This selects an image processing method for color space
conversion when you print.
- Perceptual — This is recommended for photo images.
- Relative colorimetric — More original colors can be
retained than those when you select [Perceptual].
- Saturation — This is recommended when the
vividness of colors is more important than their correct
reproduction. It is useful for graphic charts.
- Absolute colorimetric — Original colors can be
retained even on colored paper.
6) [Revert to defaults]
Click this to return the Advanced Color Settings to the
defaults.
7) [Use these settings]
Click this to save the color profile data set for this
equipment and return to the Color Settings 1 menu.
- 63 -
PRINTING FROM Macintosh
1
2
3
4
5
6
7