Toshiba E-STUDIO287CS User Manual page 65

Note
• Destinations selectable differ depending on the option
configuration.
• Depending on the equipment settings, the paper may be
delivered to a drawer that cannot carry out stapling when
[Printer's Default] is selected as the [Destination] option.
• [Tray1] can be selected only when the Finisher is
installed.
2) Stapling
This sets whether a print job is stapled.
- Off — Select this to print without stapling.
- Upper Left (Portrait) / Upper Right (Landscape) —
Select this to staple on the upper left for a portrait
document, or on the upper right for a landscape
document.
Note
• This option cannot be selected if a Finisher is not
installed.
Booklet
In the Booklet menu, you can set booklet printing.
1
2
3
4
1) Booklet Paper Size
Select a paper size for the booklet. Both sides of a sheet
are printed as two pages. The booklet size will be half the
size of the paper size that you specify.
2) Left to Right Page Layout
Select this check box to create a booklet that can be read
from left to right.
3) Booklet Center Margin
Select the width of the margin added to the center.
4) Booklet Outer Margin
Select the width of the margin added to the short edge side
of a sheet.
Cover Pages
In the Cover Pages menu, you can set Front Cover printing
and Back Cover printing.
Note
• This option menu cannot be set when the Cover Page
option for sending a print job with a banner page is enabled.
1
2
1) Use Front Cover
This sets front cover printing which allows you to insert or
print a cover on a sheet fed from a different drawer or the
bypass tray.
To enable cover printing, select this check box and select
the location from where a cover sheet is to be fed and the
print style to be used.
Source
Select from where the cover sheet is to be fed. When [Auto
(Default)] is selected, the paper is automatically selected
according to the printed document size.
Note
• The selectable values in the [Source] box vary
depending on the optional devices installed in this
equipment and their configuration on the Paper Feed
menu.
Print Style
This selects how to print the cover.
- Do not print on page — Select this to insert a blank
cover.
- Print on page — Select this to print the first page
image on the front side of a cover. When the Two-Sided
Printing option is enabled in the Layout menu, the first
two page images are printed on both sides of a cover.
- 65 -
PRINTING FROM Macintosh
1
2
3
4
5
6
7