Toshiba E-STUDIO287CS User Manual page 311

Press [AD HOC] and press [NEXT].
8
Note
• You can specify the between 1 to 11 for the channel.
However, if there is a channel that has already been
used for Ad Hoc network, use the same channel.
The SSID SETTINGS screen displayed.
9
Continue to the procedure for specifying the SSID.

P.302 "Specify SSID"
 Specify SSID
When you select the Ad Hoc Mode for the network type, you
can specify the SSID by entering the SSID manually.

P.303 "Entering the SSID manually"
Note
• If you are not sure how the SSID must be specified, see the
following section to determine the SSID.
1 Press [SSID].
The letter entry screen is displayed.
Enter the SSID using the keyboard and
2
digital keys and press [OK] button.
The screen returns to the SSID SETTINGS screen.
Press [NEXT].
3
4 The WIRELESS LAN SECURITY SETTINGS
screen is displayed.
Continue to the procedure for specifying the security
mode.

P.303 "Entering the SSID manually"
 Select security mode
After specifying the SSID, you must select the security mode
for your wireless network.
The procedure to configure the security mode varies
depending on the security mode that you select.

P.308 "Selecting WEP security mode"

P.309 "Selecting no security mode"
Note
• If the Ad Hoc Mode, only WEP or NONE can be selected for
the security mode.
• If you are not sure what security mode to select, see the
following section to determine the security mode.
- 311 -
SETTING ITEMS (ADMIN)
1
2
3
4
5
6
7