Extron electronics IN1606 series User Manual page 87

Update Firmware to Multiple Devices...
The
Upload Firmware to Multiple Devices
devices on the network.
NOTE: The connected devices must be connected via LAN.
From the drop-down menu, select
Device
. The
Multiple Devices...
opens.
Figure 55. Update Firmware to Multiple Devices Dialog Box
To update firmware to multiple devices:
1. Click the
Open Firmware File
window opens.
File
2.
Navigate to the location of the saved file.
3. Select the file and click the
NOTE: Valid firmware files have a .eff or .esf file extension.
4.
Add target devices to the
In the panel (
• TCP/IP
the ,
IP Address Password
Open a previously saved device list (see
•
5. In the left column of the
update the firmware.
6. Click the
Verify Version & Password
passwords are compatible and valid. Any connection issues are noted in the
field. Correct any issues before proceeding.
7. Click the button (
Update
To save the current list of target devices:
1. Click the
Save Device List...
2. Navigate to the desired save location.
3.
Click the button. The
Save
IN1606 and IN1608 Series Scaling Presentation Switcher • Configuration Software
option uploads firmware to multiple
Update Firmware > Update Firmware to
Update Firmware to Multiple Devices
button ( ) in the top left corner. The
1
button. The
Open Open Firmware File
in one of the following ways:
Device List
), enter the necessary information for the target device in
2
, and
Telnet Port
To open a saved device list
, select the check boxes of the desired devices to
Device List
button (
6
) to load the file to the selected devices.
7
button ( ). The
4 Save Device List
window closes.
Save Device List
dialog box
Open Firmware
window closes.
fields and click the button.
Add
on page 82).
) to verify all selected devices and
Status
window opens.
81