Extron electronics IN1606 series User Manual page 110

Mic volume
Mic volume adjusts the listening level of the mic mix (the blend of the individual
microphones) while maintaining the relative individual levels (see
page 103). The Mic Volume fader has a range of -100 dB to 0 dB. It also includes soft limit
handles to adjust the minimum and maximum allowable range (highlighted in blue).
To adjust the mic volume:
1. Click the
Mix Controls
2. Adjust the level using any of the following methods (
Click and drag the fader handle to the desired level.
•
Click the fader handle and press the <Up Arrow> or <Down Arrow> key to
•
respectively increase or decrease the level in 1 dB increments (PCS only).
Click the fader handle and press the <Page Up> or <Page Down> key to
•
respectively increase or decrease the level in 10 dB increments (PCS only).
Click in the level text field below the fader and enter a new value. Then, press the
•
<Enter> or <Tab> key to apply the change.
Click the or
• Up Down
increase or decrease the level in 0.1 dB increments.
3. If desired for the
Mic Volume
limits to define new minimum and maximum values within the original range.
4. To mute the microphone inputs, click the
Program volume
Program volume adjusts the listening level of the program source, independent of the mic
volume. The
Program Volume
limit handles to adjust the minimum and maximum allowable range (highlighted in blue).
NOTE: Listening to the audio throughout the process of setting the program volume
may be required for setting a nominal output level.
To adjust the program volume:
1. Click the
Mix Controls
2. Adjust the level using any of the following methods (
Click and drag the fader handle to the desired level.
•
Click the fader handle and press the <Up Arrow> or <Down Arrow> key to
•
respectively increase or decrease the level in 1 dB increments (PCS only).
Click the fader handle and press the <Page Up> or <Page Down> key to
•
respectively increase or decrease the level in 10 dB increments (PCS only).
Click in the level text field below the fader and enter a new value. Then, press the
•
<Enter> or <Tab> key to apply the change.
Click the or
• Up Down
increase or decrease the level in 0.1 dB increments.
3. If desired for the
Program Volume
soft limits to define new minimum and maximum values within the original range.
4. To mute the program volume, click the
fader.
IN1606 and IN1608 Series Scaling Presentation Switcher • Internal Web Pages
tab (see figure 72, on page 103).
1
4
arrow button to the right of the level text field to respectively
fader, click and drag the minimum and maximum soft
button (
Mute
fader has a range of -100 dB to 0 dB. It also includes soft
tab ( ).
1
6
arrow button to the right of the level text field to respectively
fader, click and drag the minimum and maximum
button (
Mute
Mic mix levels on
):
) below the
5
Mic Volume
):
) below the
7
Program Volume
fader.
104