Extron electronics IN1606 series User Manual page 114

Release time — Restores the output signal level to normal (unprocessed) levels when
•
the signal level remains below the threshold level for 100 ms.
Ratio — Reduces the signal level at a 100:1 ratio when the limiter is activated.
•
• Soft knee — Smooths and softens the transition from unprocessed to processed
output levels.
To enable or disable a limiter on an output:
1. Click the tab (see
Output
2. For the desired output, click the
and 108) in the appropriate output section.
Mix options
Output mix options determine what audio is output. Options vary depending on device
model and output connector.
For amplified outputs (IN1608 amplifier and IN1608 IPCP models only):
1. Click the tab (see
Output
2. If desired, deselect the
not include the mic/line inputs in the amplified output (this is selected by default).
3. In the panel (see
Mix Options
IN1608 amplifier models have different options based on the type of amplified audio
output connector.
For stereo models, the mix options include the following:
— Outputs program audio as left and right stereo.
• Stereo Program
• Dual Mono Program
channel.
— Mutes program audio.
• No Program
For mono models, the mix options include the following:
• L + R Program (Mono)
— Mutes program audio.
• No Program
For analog outputs 1 and 2:
1. Click the tab (see
Output
2. If desired, deselect the
include the mic/line inputs in the amplified output (this is selected by default).
3. In each panel (see
Mix Options
outputs can be mixed together (see the table below).
Output 1 Output 2
Left Program Right Program
L+R Program L+R Program
No Program No Program
IN1606 and IN1608 Series Scaling Presentation Switcher • Internal Web Pages
figure 69, on page 96).
4
button (see
Limiter
figure 69, on page 96).
4
check box (see figures
Mic/Line
figures 73-74, ), click the desired radio button. The
2
— Sums Left and right program audio and outputs it on each
— Sums left and right program audio on the output.
figure 69, on page 96).
4
check box (see figure
Mic/Line
figure 75, ), click the desired radio button. The two
2
Result
Output 1 and 2 act as a stereo pair (default).
L and R program audio are summed on each
output. They act as unique, independent
outputs with or without mic.
No program audio. Output 1 and 2 are treated
as unique, independent outputs with or without
mic.
figures 73-77, on pages 107
1
73-74, on page 106) to
2
75, on page 107) to not
2
108