On-screen menus — Allows for easy system setup using the front panel controls. Key
•
parameters such as input and output video formats and resolutions are grouped on the
initial Quick Setup submenu, while additional submenus provide full control over other
functions and settings.
•
Output Standby Mode — Automatically mutes video and sync output to the display
device when no active input signal is detected. This allows the projector or flat-panel
display to automatically enter into standby mode to save energy and enhance lamp or
panel life.
Output muting control — Provides the capability to mute one or all outputs at any
•
time. This allows content to be viewed on a local monitor prior to appearing on the main
presentation display.
•
Power Save Mode — Conserves energy when the unit is not in use.
•
Picture controls — Include controls for brightness, contrast, color, tint, detail,
horizontal and vertical positioning, and sizing.
•
Automatic 3:2 and 2:2 pulldown detection — Helps maximize image quality for
NTSC, PAL, and 1080i sources that originated from film.
Quad standard video decoding — Provides advanced decoding of composite NTSC
•
3.58, NTSC 4.43, PAL, and SECAM for integration into systems worldwide using a
temporal 3D adaptive comb filter.
•
User presets — Store and recall optimized image settings.
•
Internal video test patterns and pink noise generator — Offers several video test
patterns and audio pink noise to facilitate proper system setup and calibration of display
devices.
•
Front panel security lockout (executive modes) — Locks out all front panel
functions, except for input selection and volume control. All features remain available
through Ethernet, USB, or RS-232 control.
Ethernet monitoring and control — Enables control and proactive monitoring over a
•
LAN, WAN, or the Internet. An intuitive Web interface is included for full configuration of
the device.
Built-in Web pages — Enables the use of a standard browser for full control and
•
troubleshooting over an intuitive Web interface.
RS-232 control port — Enables the use of serial commands for integration into
•
a control system. Extron products use the Simple Instruction Set (SIS) command
protocol, a set of basic ASCII commands that allow for quick and easy programming.
Front panel USB configuration port — Enables easy configuration without having to
•
access the rear panel.
•
Rack-mountable 1U (IN1606, IN1608, and IN1608 HDBT) or 2U (all other IN1608
Series models), full rack width metal enclosure
•
Includes LockIt HDMI cable lacing brackets
Internal universal power supply — Provides worldwide power compatibility. The
•
100-240 VAC, 50-60 Hz international power supply is highly reliable and
energy-efficient.
IN1606 and IN1608 Series Scaling Presentation Switcher • Introduction
9