Extron electronics IN1606 series User Manual page 109

Audio mix configuration
After the audio inputs have been properly configured, select the
figure 72, ) to mix microphone levels, create a mix of the microphone and program
1
volume, and set bass and treble settings.
Figure 72. Mix Controls Tab
Mic mix levels
Mic mix levels adjust the individual mic levels to create a proper blend (mix) of the two
microphones. Adjust the Mic 1 or Mic 2 fader to adjust the desired mic/line level.
To adjust the mic mix levels:
1. Click the
Mix Controls
2. Adjust the level using any of the following methods (
Click and drag the fader handle to the desired level.
•
Click the fader handle and press the <Up Arrow> or <Down Arrow> key to
•
respectively increase or decrease the level in 1 dB increments (PCS only).
Click the fader handle and press the <Page Up> or <Page Down> key to
•
respectively increase or decrease the level in 10 dB increments (PCS only).
Click in the level text field below the fader and enter a new value. Then, press the
•
<Enter> or <Tab> key to apply the change.
Click the or
• Up Down
increase or decrease the level in 0.1 dB increments.
3. To mute the mic/line gain, click the
IN1606 and IN1608 Series Scaling Presentation Switcher • Internal Web Pages
tab ( ).
1
2
arrow button to the right of the level text field to respectively
button ( ) below the corresponding Mic fader.
Mute 3
tab (see
Mix Controls
):
103