Extron electronics IN1606 series User Manual page 32

To open the OSD menu:
1. Connect a display device to an HDMI output connector (see
2.
Press the or
Menu Enter
To navigate the OSD menu:
1. Press the or button to navigate the nine submenus. The
Up Down
shows the nine submenus and their respective submenu items.
2. Press the or
Enter Right
submenu.
3. Press the or button to navigate the available submenu items.
Up Down
4. Press the button to return to the list of submenus.
Menu
To adjust a submenu item:
1. Navigate to an adjustable submenu item and press the
the submenu item.
2. Press the or
Left Right
setting within the selected submenu item.
If the selected submenu item has multiple adjustable settings, press the
button to select a value.
3. Press the button to accept the new value.
Enter
Press the button to cancel any pending changes.
Menu
To exit the OSD menu:
From the list of submenus, hold the
IN1606 and IN1608 Series Scaling Presentation Switcher • Operation
button to open the OSD menu.
button to access the submenu items of the selected
button to adjust the setting or select a specific adjustable
button for 3 seconds to exit the OSD menu.
Menu
figure 11, on page 16).
B
table on page 25
or button to select
Enter Right
or
Up Down
26