Table of Contents
Advertisement
6 Setup Menu
Setting
Auto Return
Refresh Rate
Image Quality
Color Night
View
Access from
Mobile
*1 When selecting [Manual] for the white balance value, the white balance value you choose
will be maintained. Any setting other than manual will be constantly adjusted by the
camera. If the color balance seems odd during monitoring, wait until a predominantly
white image appears well before selecting manual.
Note
•
When registering a preset, the white balance and brightness settings used at
the time of registration will also be saved. This settings will be effective when
the camera moves to the preset position.
Privacy Mode
Privacy mode allows you to make sure images from the camera cannot be seen by
rolling the lens back into the camera. It can be turned on/off by pressing the
PRIVACY button on the camera. This feature is not available on certain cameras,
94
Available only for cameras that feature a pan/tilt lens. Choose
either none or a duration between 1 and 30 minutes. For the
camera in question, if no operation occurs during the specified
time, the sensor position will move to the lens direction. It can
be set to automatically move to the lens direction for Sensor
Alert and sensor recording.
Choose an interval to refresh the monitoring image from
among motion, 3s, 5s or 10s. When publishing the camera
externally, this setting can be used to avoid an excessive
invasion of privacy. If the update interval is set to a value other
than motion, image recording can occur for a longer period of
time as a result.
The quality of the monitored image can set to the standard
setting, or to favor either clarity or motion.
Allows you to turn the camera's color night view mode on or
off. Note that manual disable/enable is not available on certain
cameras.
Allows you to disable or enable access from the Internet.
When enabled, you can view camera images from a mobile
phone or computer when you are out of the house. Mobile
Access settings (see page 112) are needed to use this
feature.
Note that when this setting is changed, the camera may
restart automatically.
Description
Advertisement
Table of Contents
