Table of Contents
Advertisement
Setting
Proxy Server
User Name
Password Save
Password
Confirm
5.
Select [Save] and press ENTER.
•
If you select [Cancel] and press ENTER, the entered settings will not be
registered.
Note
•
When registering a camera via the Internet, set the camera's IP address
or URL and its port number in the camera address setting. When using a
URL for a camera address, be sure to set the correct IP address for the
DNS servers in the [General Setup] screen (see page 83).
•
When entering the camera address and port number, 'http://' should be
omitted.
•
Registering a camera manually will make it a remote camera. Use Quick
Setup to register a camera as a local camera.
Turns the use of a proxy server on or off.
Turn this setting on if a proxy server is needed to access the
camera's URL or IP address. Also, enter the proxy server
and port indicated in the [General Setup] screen (see
page 83).
Sets the user name for the camera.
Sets the option to save the camera password.
Turning it off will require the entry of a user name and
password whenever a camera is accessed.
•
Turning off password saving will disable timer
recording settings (see page 63).
Sets the camera password.
Confirms the image of the camera being configured. If an
image is not visible, double check the settings above. After
confirming the image, proceed to step 5.
Description
6 Setup Menu
91
Advertisement
Table of Contents
