Accessing From A Mobile Or Computer - Panasonic BL-WV10 Operating Instructions Manual

Wireless camera monitoring system
Hide thumbs Also See for BL-WV10:
Table of Contents

Advertisement

7

Accessing from a Mobile or Computer

If you are using a router, you can view camera images from a computer connected
to the same network as the camera.
If the router is configured to allow access from the Internet, you can view camera
images from a mobile phone or computer when you are out of the house. You can
also set the camera to send notification by e-mail when the camera's sensor is
triggered.
Note
To view camera images from a mobile phone or computer when you are out of
the house (I.e., access a camera over the internet), refer to the operating
instructions included with your camera.
Certain mobile phones are not compatible with this product. See the Panasonic
Network Camera support website at
http://panasonic.co.jp/pcc/products/en/netwkcam/ for information on mobile
phones that Panasonic has verified as being compatible with this product.
The [Mobile Access] screen is used to verify a camera's URL, configure the Auto
E-mail features, enable/disable mobile or computer access, enable/disable sensor
notification by e-mail.
1.
Press MENU.
2.
Select [Mobile Access], then press ENTER.
The [Mobile Access] screen appears.
Camera URL:
Allows you to confirm the camera's URL (see page 108).
Auto E-mail:
Allows you to configure the camera to send e-mail notification when the camera's
IP address changes or when the camera's sensor has been triggered (see
page 108).
7 Accessing from a Mobile or Computer
107

Advertisement

Table of Contents
loading

Table of Contents