Table of Contents
Advertisement
Compatible Network Cameras (sold separately)
The following cameras are compatible with the BL-WV10, however, certain camera
features cannot be used. See page 5 for more information.
•
Panasonic C series Network Cameras (BL-C10: firmware version 1.24 or
higher; All other: 1.30 or higher)
•
Panasonic HCM series Network Cameras (firmware version 1.30 or
higher)
•
Note that the following HCM series cameras are not supported by the
BL-WV10:
- KX-HCM8
- KX-HCM10
- KX-HCM230
- KX-HCM250
- KX-HCM270
- KX-HCM280
For the latest firmware, visit http://panasonic.co.jp/pcc/products/en/netwkcam/
Other Important Information
•
This product is not designed to provide surveillance for the prevention of
burglary or theft. We cannot be held responsible in the event of such
incidents.
•
If you are using a wireless router, connect the BL-WV10 to the router using
an Ethernet cable. Wireless connection to the router is not supported.
•
If the camera's color night view mode is turned on, the image refresh rate
and overall image quality may decrease. As a result, objects may not be
displayed properly. In low-light environments, images may be out of focus
when using the pan/tilt feature or when the subject is moving. We
recommend brightening the subject or disabling color night view mode.
•
The detection range of the sensor becomes shorter as the environmental
temperature within the range of the sensor becomes higher.
•
When a camera's motion detection feature is enabled, camera images
refresh rate may decrease by 10 to 20%. Moving objects in a dark
environment may not be detected properly.
•
The cameras shown in the illustrations in this document are the BL-C10
and BL-C30. They are used as examples only.
3
Advertisement
Table of Contents
