10 Resetting the BL-WV10
Press the FACTORY DEFAULT RESET button to return to default settings. You will
no longer be able to connect to the camera. After returning to default settings, you
will need to re-do the settings completely.
1.
While the BL-WV10 is turned on, set the mode switch on the back to SETUP.
2.
Press and hold the FACTORY DEFAULT RESET button for 3 seconds and
then release it.
•
The reset will be complete after you hear 2 beeping sounds.
•
After re-launching, the [Basic Setup] screen will appear.
3.
Re-perform Quick Setup.
Rear panel of BL-WV10
10 Resetting the BL-WV10
Press and hold the
FACTORY DEFAULT
RESET button for
about 3 seconds using
a pointed object.
125