Table of Contents
Advertisement
3
Viewing Camera Images
When the unit is turned on with the mode switch set to NORMAL, the camera
image will be displayed after the unit starts up.
Note
•
Frame rate (frames per second, "fps") may vary depending on the image
being viewed by the camera, brightness, and other environment
conditions, as well as network conditions such as distance between the
BL-WV10 and the cameras, the number of cameras connected, network
traffic, wireless network conditions (see page 7), etc.
•
For BL-C10 and BL-C30, a maximum of 15 fps in LOW quality (resolution)
and 7.5 fps in HIGH quality is possible (see page 117).
•
For HCM series cameras, a maximum of 30 fps in LOW quality and 12 fps
in HIGH quality is possible (see page 117).
•
Network speed may decrease while the BL-WV10 is turned on and
connected to cameras.
•
The display size and brightness of the monitoring screen can be adjusted
(see page 115).
3 Viewing Camera Images
35
Advertisement
Table of Contents
