Table of Contents
Advertisement
2.3
Local and Remote Cameras
Cameras accessed by the BL-WV10 are referred to as either "local" or "remote"
cameras, based on the way in which they are configured.
Local cameras allow you to not only monitor images, but can be used in
conjunction with the various features of the BL-WV10. Remote cameras, such as
cameras accessed over the Internet, can be monitored, but certain BL-WV10
features may not be available with remote cameras.
INTERNET
Router
BL-WV10
Admin. User Name: AAAAAA
Admin. Password:
Local Area Network (LAN)
Note
•
If a camera does not meet the firmware requirements noted on page 3, the
camera will be registered as a remote camera or may not be able to be
registered. We recommend updating the camera's firmware to the latest
version before registering it. For more information, see the operating
instructions included with your camera.
•
User names and passwords shown here are examples only.
Remote Camera
Cameras connected via an Internet connection
User Name: AAAAAA
Password:
BBBBBB
Local Camera
Camera's Admin. User Name
and Admin. Password is the
same as the BL-WV10's User
Name and Password
BBBBBB
Local Camera
Cameras configured using the BL-WV10's
Quick Setup utility (some exceptions apply)
User Name: WWWWWW
Password:
XXXXXX
Remote Camera
Camera's Admin. User Name
and Admin. Password is
different from the BL-WV10's
User Name and Password
2 Setup
21
Advertisement
Table of Contents
