Table of Contents
Advertisement
•
Remote cameras for which passwords are not saved will not be displayed. If all
registered cameras are remote cameras for which passwords are not saved,
the following screen will appear. When using remote cameras for timer
recording, change their settings such that passwords are saved (see
page 101).
Setting
Record Type
SD Recording
•
The sensor range may differ depending on the camera type. To record
from remote cameras using sensor activation, confirm that the cameras
are set for sensor use (see page 102). See the camera user guide for
cautions in placing the camera to maximize that range.
•
To record images from the Monitoring Screen to a video deck or a
DVD/HDD recorder, select [—]. Use a video cable to connect the video
output port on the BL-WV10 to the video input jack on a video deck or
DVD/HDD recorder, setting the time for recording on the video deck or
DVD/HDD recorder to match that of the BL-WV10. At the set time, the
Monitoring Screen for the specified camera will appear and be recorded
on the video deck or DVD/HDD recorder.
7.
After setting the content, press ENTER.
•
Timer recording is now set.
8.
Press TIMER to turn the timer on.
•
Upon doing so, the timer/access indicator will turn green.
Select the recording method.
[All]: Records all images from the camera during the time
interval specified.
[Sensr] (Sensor): Records images from the camera during the
time interval specified, but only when the sensor is activated.
To record to an SD memory card, select [O].
To record to a different destination, select [—].
When [SENSOR] has been selected for content, only [O] is
available.
Content
4 Recording Images
63
Advertisement
Table of Contents
